Skip to content

Black Friday: 40% offCode: BOLLO40Learn more

Documentation
Manual contents

๐Ÿ›๏ธ Sales: margins and rounding

In 30 seconds

  • Settings โ†’ Sales decides at what price you sell: the margin each price starts with, when a low margin warns you and how prices are rounded.
  • It has three sections: Margins, Products for sale and Sales channels.
  • Rounding never changes a price you type yourself on its own: it rounds the automatic price of material and, for everything else, only suggests it.
  • The Owner and the Administrators change it, and it applies to the whole workshop.

What things cost is in Costs; what you sell them for, here. Margins used to be in Costs โ†’ Default values and have moved to this section with the same values: if you had already set them, they stay the same.

In the Settings menu, the Sales group sits just below Workshop:

SectionWhat you decide
MarginsThe red and orange margin warnings, and the margin new things are priced with
Products for saleWhether all your material goes on sale and how prices are rounded
Sales channelsThe list that says where each order came in from

Margins

Two blocks with a single Save button, which turns orange as soon as you touch anything.

Margin warnings

They apply to everything you sell: your 3D products' variants, order and quote lines, services and material for sale. The margin is coloured red below the first warning, orange between the two and green from the second one up.

FieldWhat for
Red warning belowBelow this margin, you're selling too cheap
Orange warning belowBetween the two warnings, the margin is tight; above it, healthy

Below, a bar paints the three zones (Selling too cheap, Tight and Healthy) and marks with a line where your default margin falls. The example sentence turns the percentages into prices for a piece that costs you ยฃ10. The red warning can't be above the orange one: if that happens, the bar tells you.

If you haven't changed them, red is 40% and orange, 50%.

Default margins

The margin new things are priced with. The calculation is Price = Cost / (1 โˆ’ Margin %/100): something that costs you ยฃ10 with a 60% margin comes out at ยฃ25 excluding VAT. After that, each item's price is changed on its own record.

FieldWhat for
3D productsThe margin for new variants. If you haven't changed it, 60%
Filament ยท Resin ยท SuppliesThe margin for the material you put up for sale, one per type

If you leave a material type's margin empty, it uses the 3D products one; the empty field shows it to you in grey.

Changing a margin doesn't touch your 3D products' prices: it only applies to new variants. Material for sale is different, because its price is calculated automatically: if its margin changes, BolloPrint asks you which material to apply it to (it's explained further down, in Which material does the change apply to?).


Products for sale

Two blocks, each with its own Save.

Material for sale

The All material for sale switch decides which part of your Inventory is sold in Products, on the Filaments, Resins and Supplies tabs.

  • On: what you have in Inventory and what you add later goes on sale at its automatic price. To take one out: โ‹ฎ โ†’ Take off sale, in its tab in Products.
  • Off: only what you put up for sale yourself is sold, from Products.

How material is sold, its record and its price: Material for sale.

Rounding

The Round prices switch comes turned off: prices keep whatever decimals they come out with. When you turn it on, the settings appear.

What's rounded is the final price, the one your customer pays, with VAT included; the price excluding VAT is worked out from it. And a price you type yourself never changes on its own.

FieldOptionsWhat for
Toยฃ0.10 ยท ยฃ0.50 ยท ยฃ1 ยท ยฃ5 ยท ยฃ10The steps your prices go up in
DirectionUp ยท Down ยท NearestWhich way the price moves
Ending inNo ending ยท .90 ยท .95 ยท .99 ยท OtherHow the price ends. With Other you type the ending yourself, which has to be less than To

The first time you turn it on, ยฃ1, Up and .90 come set. Below, a line shows you the effect with a sample price and changes along with your settings: โ€œFor example: ยฃ32.40 โ†’ ยฃ32.90โ€.

If your workshop's currency has no cents, the endings and the amounts of less than one unit don't appear.

Where it's used

The checkboxes say which prices the rule applies to, in two groups:

GroupCheckboxWhat happens
Changed automatically ยท because you set the ruleAutomatic price of materialThe price BolloPrint calculates for your material for sale comes out already rounded
We offer โ€œRound toโ€ฆโ€ ยท under the price, you decideSuggested price of 3D productsBelow the variant's price the Round to ยฃ32.90 button appears (with your rounded price). It comes unticked
Price of servicesThe same, on each service's record. It comes ticked
Price of order and quote linesThe same, below each line's final price (or its single price, if the document carries no VAT). It doesn't appear on marketplace orders. It comes ticked

In the We offer group, the price doesn't change until you click Round toโ€ฆ. If you untick a checkbox, that screen stops suggesting it. How the price excluding VAT and the final price work: Price excl. VAT and final price.

How it looks

With rounding turned on, below you have a table that does the whole calculation with your margins and your tax, for four examples: 3D product, Filament ยท 1 kg, Resin ยท 1 L and Supply ยท nozzle.

ColumnWhat it shows
CostWhat the example costs you
With the marginThe price excluding VAT, with its type's margin
With VAT 20 %The price with your tax, before rounding
Final priceWhat your customer pays. If rounding has changed it, the previous price appears crossed out next to it
Excl. VATThe price excluding VAT that results from the rounded final price

If you don't charge tax, the VAT columns don't appear and the table reminds you that the final price is the price excluding VAT.

On screen, instead of โ€œVATโ€ you'll see your workshop's tax name (VAT, IGICโ€ฆ), the one you choose in Tax information.


Which material does the change apply to?

This window appears when you save a change to Margins or to Rounding that would move the automatic price of material you already have for sale. For example, if you change the Filament margin, or the 3D products one while the Filament one is empty. If no price would change, it's saved without asking.

At the top it tells you what you've changed (โ€œThe Filament margin goes from 60 % to 50 %.โ€ or โ€œYou changed the rounding of the automatic material price.โ€), and gives you two options:

OptionWhat happens
Only to new materialWhat's already for sale keeps its price. The new rule applies to what you put up for sale from now on. It's the one that comes selected
To everything already for saleIt tells you how many prices change and recalculates them with the new rule

If you choose To everything already for sale:

  • A warning reminds you that this overwrites the prices they already had: check them before saving.
  • The Leave the prices you set by hand alone checkbox comes ticked: material with a Manual price stays as it is.
  • A table per type (Filaments, Resins and Supplies) shows each material with its Cost, the Final price now, the New final price and the Difference. The ones that don't change say unchanged.
  • The button becomes Save and change prices, with how many change.

Cancel closes the window without saving anything: neither the setting nor the prices.


Sales channels

The list each order and each quote uses to say where it came in from: Etsy, your website, a fair, an in-person saleโ€ฆ It used to be in Operations; now it lives here, alongside everything else to do with selling. It works the same way: Sales channels.


Who can change it?

WhoWhat they can do
Owner and AdministratorOpen Settings โ†’ Sales and change margins, material for sale, rounding and sales channels
Worker and Read-onlyThey don't see Settings, but their orders, quotes and records use these settings

You can also see your default margin in Costs โ†’ Summary, in Your rates now, with Change โ†’ to come here. See Costs.