๐งต Material for sale
In 30 seconds
- Sell the filament, resin and supplies from your Inventory as they are: in Products, on the Filaments, Resins and Supplies tabs.
- They aren't a copy: they're the same Inventory rows. The name, the stock and the cost come from there.
- The price is Automatic (your margin, your VAT and your rounding) or Manual.
- When you sell it, the stock goes down in Inventory.
If you have spare spools, bottles of resin or nozzles, you can sell them. You don't need to register them again for that: material for sale is the same material you already have in Inventory, with a sale price on top.
Where it is
In the sidebar, Sales โ Products. Each type has its own tab: Filaments, Resins and Supplies. You see it as cards or as a list.
The counters at the top are For sale, Out of stock and Low margin, and they count the type of the tab you're on. Clicking the last two filters the list.
| Toโฆ | Use |
|---|---|
| Search by name | The Search materialโฆ box |
| See one type of material or one manufacturer | The Type and Manufacturer filters |
| See what you have or what has run out | The Stock filter โ In stock or Out of stock |
| See which prices you set by hand | The Price filter โ Auto or Manual |
| See what you're selling too cheaply | The Margin filter โ Low margin |
| See what carries a tag | The tags selector |
Each card shows the final price, the price excluding VAT with its VAT, the margin, the stock (โIn stock: 3โ or Out of stock) and its tags.
Putting material up for sale
Click New material. A list appears with what you have in Inventory that isn't for sale yet, each one with its automatic final price.
- Choose the type at the top; it starts with the one of the tab you were on (you can tick items of several types: what's ticked stays ticked when you switch).
- Tick what you want to sell. If you want a different price, type it on its row: it becomes Manual.
- Click Add.
Not in the list? Add it to Inventory first, even with 0 units.
Want to sell your whole inventory? Turn on All material for sale in Settings โ Sales โ Products for sale. What you have and what you add to Inventory later goes on sale at its automatic price. See Sales: margins and rounding.
A material's record
Click a material to open its record.
| Field | What for |
|---|---|
| Image | If the material comes from the catalogue, it brings its image. You can set your own for the point of sale; if you remove it, the catalogue's comes back. |
| Stock | What you have, from Inventory. See in Inventory takes you to its row. |
| Name when sold | Optional. How it appears when you sell it. If empty, the Inventory name appears. |
| Price | At the top you choose Automatic or Manual, and below it is the price row. |
| Tags | At the top, next to Save: your workshop's tags, as on a 3D product. You can also create one from there. |
The price row is the same as everywhere in the app: Unit cost (the one from Inventory, it isn't changed here), Margin, Excl. VAT, VAT % and Final price. See Price excl. VAT and final price.
Automatic or Manual
| Mode | Where the price comes from |
|---|---|
| Automatic | From the cost, with that material type's margin, your workshop's VAT and your rounding rule, all from Settings โ Sales. If you type a price or a margin, it becomes Manual. |
| Manual | The one you type. If your workshop has a rounding rule, Round toโฆ may appear below the final price: it's only a suggestion. To go back to the automatic price, choose Automatic. |
The automatic price is calculated when you put the material up for sale and it stays. If what it costs you in Inventory changes later, the margin you see changes, not the price. To recalculate it with the new cost, click Automatic on its record and save.
If you change a material type's margin or the rounding in Settings โ Sales, BolloPrint asks you โWhich material does the change apply to?โ: only to new material, or also to what's already for sale (and you can leave out the prices you set by hand).
Taking it off sale
In the list, click โฎ โ Take off sale on its row (or on its record). The material is no longer sold, but it stays in Inventory with its stock. To sell it again, add it again with New material.
Selling it
| Where | How |
|---|---|
| Orders and Quotes | In the lines, Add โ Filament, Resin or Supplies. Set the quantity and click Add. |
| Point of sale | Filaments, Resins and Supplies tabs: each tap adds one unit. See Point of sale. |
The stock goes down in Inventory when you sell. On an order, before taking it off, BolloPrint shows you what comes out of the stock and asks you (Take from the stock or Donโt take from the stock). If you cancel the order, you can put it back. It's explained in Inventory.
You can sell even if you don't have enough left: the line warns you (โOnly 2 in stock. It is sold anyway and the stock stays at 0.โ). The stock never goes below zero.
A material line isn't printed or marked as done: it comes out of the stock and that's it.
Who can manage it?
| Role | What they can do |
|---|---|
| Owner, Administrator and Worker | Put material up for sale, change its price and take it off sale. |
| Read-only | See it. |
All material for sale, the margins by type and rounding are in Settings, and only those who can configure the workshop can go there.
If something doesn't add up
| Ifโฆ | What happens |
|---|---|
| New material says there's nothing to add | Your whole inventory is already for sale, or you don't have any material in Inventory yet. |
| A material has no margin | It has no cost in Inventory. Give it one there. |
| What it costs me has gone up and the price is still the same | That's expected: the price stays. On its record, click Automatic and save, or type the price yourself. |
| When adding a line it says โYou have no material for sale yetโ | Put it up for sale in Products, in the tab for its type. |