Skip to content

Black Friday: 40% offCode: BOLLO40Learn more

Documentation
Manual contents

๐Ÿงฎ Calculator

In 30 seconds

  • How much should I charge for this? Upload the file your slicer gives you and BolloPrint reads the weight, the time and the materials, adds up what it costs you and suggests a price with your margin.
  • It works without a file too: you type the details in by hand.
  • Nothing is saved until you want it to be. When you're happy with it, click Createโ€ฆ and you leave with a quote, a product, a design or several at once.
  • It's an add-on on every plan, Hobby included. The Owner or an Administrator switches it on: Add-ons.

Once it's switched on, you'll find it in the sidebar, at the end of the Workshop group: Calculator.

The calculator uses your rates from Settings โ†’ Costs (what material and an hour of printer time cost you) and your margins from Settings โ†’ Sales. If you haven't set them yet, the numbers will only be a rough guide: see Costs.


The screen

On the left, the piece's details; on the right, the Result, which stays in view while you scroll down. On a phone everything goes in one column, with the price and the create button in a fixed bar at the bottom.

At the top, the piece's name (click to change it), the Unsaved tag and the red Clear button, which wipes everything to start another one (it asks you to confirm).


1. The file and the measurements

Drag in the slicer file or click to choose it: a .gcode.3mf, .gcode, .bgcode or .goo. BolloPrint fills in:

FieldWhat it is
Pieces (per plate)How many come out per plate. The cost per piece is the plate's cost divided by them.
WeightThe grams of material for the whole plate.
TimeHours and minutes of printing.
Dimensions (mm)The size of the piece.

Alongside you see the plate image the slicer saved, if there is one.

What comes from the file carries the G-CODE tag. If you change a value by hand, it becomes EDITED and you have Restore to go back to the file's value.

Change uploads another file; the ร— next to it removes the file and, with it, the whole calculation (it asks you to confirm, like Clear).


2. Materials

Choose Filament or Resin. Each material in the file appears on a row with its colour, the material, the price per kilo, the percentage and grams it uses, and what it costs.

  • The price per kilo comes from the spool in your Inventory or from your workshop's rate for that type of material. You can change it on the same row.
  • If the file says which materials it uses but not how many grams of each, BolloPrint splits them equally and warns you so you can adjust it yourself.
  • At the bottom, Add material and whether the split adds up to 100 %.

3. Post-processing and extras

  • Post-processing: choose the piece's Finish. Its cost comes from Settings โ†’ Costs and you can change it in Finish cost.
  • Extras: what you add separately, such as packaging or magnets, with +.

4. The result

From top to bottom:

  • The price including tax, in large type: what your customer would pay. Below it, the price excluding tax and the profit you're left with per unit.
  • The margin, with a slider you move to raise or lower it. It starts at your workshop's margin and shows in red, orange or green according to your limits in Settings โ†’ Sales โ†’ Margins.
  • What each part costs: material, printer, finish and extras, with a bar that splits them. You can change the printer's price per hour on its line.
  • The cost per piece: the plate's cost divided by the pieces that come out of it.

If your workshop has no printer rate, you get a warning that takes you to Costs.


5. Creating something with the result

When you're happy with the price, click Createโ€ฆ, at the end of Result (on a phone, in the bar at the bottom). You type a name and tick what you want; Quote comes ticked. Click Create:

If you tickBolloPrint createsAnd takes you to
QuoteNothing yetA new quote with a line with the price, the cost, the weight and the time. You choose the customer and save it there.
Quote and ProductThe product (with its design)The new quote, with the line already linked to that product.
Quote and DesignThe designThe new quote, with a standalone line.
ProductThe product, with its design and its pieceThe product.
DesignThe design and its pieceThe design.

A product always comes with its design: when you tick Product, Design is ticked automatically. A product or a design needs the name and the weight; a quote alone doesn't. The piece that's created keeps what was calculated (weight, time, pieces per plate, finish, extras and the rates you used), the slicer file and the plate image as a photo. That way it costs exactly what the calculator showed you.

If you've created a product or a design, the calculator is emptied for the next one. If you've only created a quote, the calculation is still there.

More about what's created: Designs, Pieces, Products and Variants and Quotes.


If something doesn't go as you expect

Ifโ€ฆWhat happens
I've reloaded the pageThe calculation is still there as long as you don't close the tab. If more than a day has passed, the file may no longer be there: BolloPrint warns you, removes the file and keeps your numbers.
The file has no imageSome formats don't save one. The calculation works just the same.
The price looks very low or very high to meCheck your rates in Costs and your margins in Settings โ†’ Sales โ†’ Margins.